Jiangxi Mingxin Metallurgy Equipment Co., Ltd.
Main products:Spiral Chute
Products
Contact Us
  • Contact Person : Mr. Li Leo
  • Company Name : Jiangxi Mingxin Metallurgy Equipment Co., Ltd.
  • Tel : 86-0797-5712838
  • Fax : 86-0797-5790996
  • Address : Jiangxi,Shicheng,Industrial Park
  • Country/Region : China
  • Zip : 342700

40T hydraulic cutting machine for battery

40T hydraulic cutting machine for battery
Product Detailed
Maximum pressure: 0 ~ 40 tons production capacity: 20 t-30 t/d (according to the battery size) Power: 7.5 KW

6. Technical specifications

(1), product name :  40 T hydraulic cut the rope machine

(2), the technical parameters:

1. The motor power: 7.5 K 

2. Oil cylinder diameter: 150

3. Common working pressure: 16~20 MPA

4. Type: horizontal shear, manual or automatic control.

(3), the main material instructions

1. The blade: 9 SI CR            hardness: HRC 56-62

2. The body and the rest of the frame for ordinary carbon steel

(4) related instructions

1. The motor Y132M-4 7.5 KW

2. Piston pump 40 YCY 14-1 B

3. Oil seal  1 set

(5) the scope of supply

One main machine , one conveying frame, one hydraulic station , one motor and one control box;

(6) the vulnerability parts of machine 

Oil seal: UM150 X 130 X15    2unit ;     UM100 X 115 X 12        2unit;

J 100 X 110 X 6-8    1unit.

O circle: 5 X 150 a 5 X 75   2unit.

1,summarize

This series of machine applicable waste storage battery industry, with ease of storage simple cutting, convenient and metal plastic separation of subsequent; The operation is simple and easy. Features: 1. The machine adopts hydraulic drive; 2. Capacity; 3. Safe reliable.

2,general feature and technical parameter

Maximum pressure: 0 ~ 40 tons 

production capacity: 20 t-30 t/d (according to the battery size)

Power: 7.5 KW 

oil cylinder specification: lower than 150

Commonly used pressure: 16-20 mpa 

operation forms: electric control

3,Equipment installation 

There are no needs to install the foundation and feet screws for this equipment, just put it on the floor that conform the floor is flat ground should be okay. And make connecting with the main machine, conveying station and hydraulic station together.

4.Production operation

1,before the machine starting must be checking whether normal voltage 380 V power, make sure the hydraulic oil(46 # or 68 #)fully inside the oil tank(capacity for the oil tank: 200liter); When the hydraulic oil is not enough within the machine; in this situation, the pump will take air inside the oil tubing and oil cylinder cause the operating voice become bigger than before, also reducing the pressure by the machine; solution: make sure there are fully enough hydraulic oil within the oil tank(200liter).

2,switch on power and control box and checkup the power indicator light( the indicator light is red color), press start button to confirm the correct direction of the oil pump and the motor steering whether according to oil pump rotation; Also listening the operating voice whether normal operation; in some situation which the oil pump rotation has wrong direction that hydraulic cylinder cannot work; solution: worker may exchange the connection of the three-phase power which within the control box, and restart the machine again should be okay;

This equipment has manual and automatic operation mode; (1)When workers selecting the manual mode, just switch on the manual button for manual mode (the No. 2 yellow indicator light which may turns on), then the operator may control from three different button to make the machine working; there are forward button, stop button and come back button;  at this time the hydraulic cylinder will following the three different instruction to do the action.

40T hydraulic cutting machine for battery



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.